Sleep Mode; App Connection - Sunny Health & Fitness SMART OBSIDIAN SURGE 500 User Manual

(4) H.R.C:
A. Enter into the MANUAL mode and press "ENTER" button until the value of PULSE is blinking.
B. Press "UP" and "DOWN" buttons to set exercise pulse. The setting values of 30-240 BPM.
C. The meter alarm and the value of the PULSE is blinking when heart rate is above the SET value.

SLEEP MODE

If no signal is received for 4 minutes and the button is not pressed, the meter will automatically turn off and enter into sleep
mode. Start exercising or press any button and the meter will restart.
BATTERY
This meter uses 2 AA batteries, which are included. Changing the batteries will reset all values.
If there is a problem with the display, try changing the batteries first. When changing the batteries, change both. Do not mix
battery types. Do not mix old and new batteries. Dispose old batteries according to your regional guidelines.

APP CONNECTION:

1. Scan the QR code below to download the SunnyFit app onto your mobile device.
2. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account
and log in.
3. Ensure that the Bluetooth
4. To connect the equipment to the SunnyFit app:
a. From the "Workout" tab, press on the "Search" button to search for your equipment.
b. Once your equipment appears on the list, tap the "Select" button to confirm.
c. Note: If your equipment does not appear on the "Searching for Equipment" list, check the EXERCISE METER on
your equipment to ensure that it is not in sleep mode and your phone's Bluetooth function is on, then tap "Retry" to
search again.
d. Once your equipment shows up on the "Workout" tab as "Currently Selected", your equipment is now ready to
display, track, and record your equipment's workout stats on the app!
5. If you are unable to replicate these steps, or have any other issues with the SunnyFit app, please contact SunnyFit
support at support@sunnyfit.com, or use the in-app "Contact Us" form to request support ("Me" tab -> "Contact Us").
function is turned on from your mobile device.
13