Graco PM8 Repair Instructions page 9

F . 5
IG
4. Position the bezel (1) so that the display is in the
upright position when holding the valve.
5. Reassemble the bezel (1) to the meter housing (10),
see F . 3 on page 8.
IG
6. Replace the four screws (9) and torque to 15 to 25
in-lbs (1.69 to 2.82 N•m), see F
7. Reassemble the impact guard (37).
8. Replace the meter onto the hose.
3A8560C
. 2 on page 7.
IG
Repair
9