C10 Automatic Restore Default Setting; C11 Attribute Selection Setting - KUNTENG KT-LCD11 User Manual

ELECTRIC BICYCLE METER KT—LCD11 Product User Manual
button (UP) or
Please note：If you forget your password, the parameters can only be copied (see
parameter copy) by data source meter prier to be decoded.
After finishing C9 parameter setting, press
value and then enter C10 parameter setting interface.
○

C10 Automatic Restore Default Setting

Enter C10 parameter setting interface, C10 parameter column flashes.
C10 is automatic restore factory settings, the default is N, and the setting can be N, or
Y, press button (UP) or
C10 parameter definition table：
C10 value
When the meter is needed to restore default setting, C10 selects Y, hold
long for about 2 seconds, all parameters restore default settings and exit setting
environment, and then return to the display1.
After finishing C10 parameter setting, press
value and then enter C11 parameter setting interface.
○

C11 Attribute Selection Setting

Enter C11 parameter setting interface, C11 parameter column flashes.
button (DOWN) for selection.
C10 parameter setting interface
button (DOWN) for selection.
N
Y
button (SW) to save the current
Restore default setting
Function off
Function on
button (SW) to save the current
- 27 -
button