Danfoss EKE 1A User Manual page 6

Superheat controller, Type EKE 1A, 1B, 1C, 1D
Table 2: Accessories and Related products
MMIGRS2 Display
User interface module MMIGRS2 Display.
Table 3: Accessories and Related products
Pressure Transducer
AKS Pressure Transmitter,available with ratiometric
and 4 - 20 mA. NSK Ratiometric Pressure Probe. XSK
Pressure probe 4 - 20 mA.
Table 4: Accessories and Related products
Stepper motor valves
EKE is compatible with Danfoss stepper motor valves i.e Danfoss ETS 5M, ETS 6,
ETS, KVS, ETS Colibri®, KVS colibri®, CTR, CCMT.
© Danfoss | Climate Solutions | 2022.06
ACCCBI Cable
ACCCBI cables for MMI display and gateway.
Temperature Sensor
PT 1000 AKS is a High precision temp. sensor AKS 11
(preferred), AKS 12, AKS 21 ACCPBT PT1000 NTC sen-
sors EKS 221 (NTC-10 Kohm) ACCPBT NTC Temp probe
(IP 67 / 68)
Various lengths of standard M12 cable are available for connecting stepper motor
valves.
MMIMYK Gateway
MMIMYK device is used as a gateway to connect EKEs
and the KoolProg PC software for parameter setting
or data logging.
Power Supply
AK-PS Input: 100 - 240 V AC / 45 - 65 Hz Output: 24 V
DC: available with 18 VA, 36 VA and 60 VA ACCTRD IIn-
put: 230 V AC, 50 – 60 Hz Output: 24 V AC, available
with 12 VA, 22 VA and 35 VA
M12 Angle Cables
BC398828796060en-000101 | 6