Danfoss EKE 1A User Manual page 32

Superheat controller, Type EKE 1A, 1B, 1C, 1D
• EKE must be powered up before starting programming.
• To guarantee a reliable USB connection to a host device (e.g., industrial PC), you must: keep USB cable length < 1
m.
• When prgoramming with koolprog if there is any error with values set then EKE will go to factory defualt settings
after restart. Make sure values entered are within range specfied for each parameter.
Figure 37: koolprog to EKE 1x
• Create your own configuration files on your PC without
having to connect a controller
• Import a parameter configuration file to your PC from a
connected controller. Save the file and download it to
other controllers of the same model
• Select the most frequently used parameters as your fa-
vorites
• Find all the technical documentation for each controller
model within one location
4.2.1 Setting Up KoolProg
KoolProg software supports wide range of Danfoss product, so first you need to select the EKE 1x series from the
preferences.
Figure 38: Setting Up KoolProg
Then if you want to setup, click the set parameter and select a new project
© Danfoss | Climate Solutions | 2022.06
• Quickly program one. or multiple controllers
by using the progress and completion status
indicators
• Quickly analyze controller behavior and program
patterns by using the graphical trending tool
• Make Online changes to parameter configurations
• Monitor live status of inputs and outputs
BC398828796060en-000101 | 32