Configuration Using Koolprog Software - Danfoss EKE 1A User Manual

Superheat controller, Type EKE 1A, 1B, 1C, 1D
 NOTE:
This mode only has a home screen and do not have any menu structure. All function is carried out using the
"Escape", "Up", "Down" and "Enter" buttons on MMIGRS2
Service mode is only available via MMIGRS2 display. This function is not possible in KoolProg
Figure 34: Service mode through MMIGRS2
Controller name
Actual step position
Valve Type
Speed
Current (mA Peak)
Total no of steps
Figure 35: Service mode through MMIGRS2

5.2 Configuration using KoolProg Software:

KoolProg is a software tool that can configure the EKE Controllers in fast and easy way. The main features of the
KoolProg are listed as follows
• Make Online changes to parameter configurations
• Monitor live status of inputs and outputs
• Quickly analyze controller behavior. and program patterns by using the graphical trending tool
Figure 36: Connecting koolprog to EKE 1x
CANRJ
EKE
Power
supply
MMIMYK Gateway
 NOTE:
• Make sure to install the latest version of the EKE.
• The connection of the EKE to the koolprog software, must be done through the MMIKYK gateway.
• KoolProg software do not support multiple EKE controllers in a daisy chain network.
© Danfoss | Climate Solutions | 2022.06
Service screen
Up : Adjust requested step position upward
Escape: Leave service mode
Right , Left : Navigate to alarm list, status,
controller info
Enter short press: start edit of requested
position/accept change
Enter press for 2 sec: change valve selection
UP and Down together: set actual step
position to 0 step
USB
Navigation help
Requested step
position
BC398828796060en-000101 | 31