Unmounting The Device From A Mounting Rail - Bosch ADS?AMC2?2WCF Installation Manual

Access Modular
Controller 2
4.2 Unmounting the device from a mounting
rail
Notice!
To remove the controller from a mounting rail, first remove all
pluggable connectors.
Push down the controller until the lower edge snaps out of the
mounting rail [1]. Pull the lower end of the controller from the
mounting rail [2].
1
Figure 4.2: Unmounting the controller from a mounting rail
Bosch Security Systems B.V.
Installing | en
2
17
2019-11 | V02 |