Technical Support - SINTERIT LISA X Translation Of The Original Manual

7. Take the overflow container from its drawer and transfer its content into a metal container or onto the PHS worktop.
8. Put the overflow container back in its drawer.
IMPORTANT!
Make sure the overflow container is oriented correctly once you put it back. Pay attention to the
markings on the container.
9. Press the UNLOCK OVERFLOW button to release the lock and slide the drawer back into the printer.
ATTENTION!
Attempting to slide the overflow container back into the printer without unlocking the security
system may damage the drawers mechanisms.
10. Close the printer door and press DONE.
11. If you want to know how much fresh powder you need to add to the used powder press SHOW REFRESH INFO. If you
wish to instead do that another time, press SKIP.

5. Technical support

In case of any questions or issues, please don't hesitate to contact our After sales team:
• e-mail: support@sinterit.com
• phone: +48 570 702 886
The full list of resellers and technical support in select countries can be found at www.sinterit.com/contact.
Fig. 4.1 Sliding out the overflow container.
Sinterit LISA X User Manual | 10