Receiving A Call; Signal Strength; Volume Keys - NEC DT 2000 Owner's Manual

If the No Service Bars appear,
cellular service area. If the lock indicators,
the display, your phone has been electronically LOCKED (see
Locking/Unlocking the Phone). You can still make emergency
calls when the phone is locked.
1) When there is an incoming call, the phone rings, and the
CALL message flashes on the display. If Caller ID is available
in your area, the number and/or name may also be displayed.
If the ringing tone has been switched off the flashing of the
display and keypad will alert you of an incoming call.
2) Press SND (Any Key if Any Key Answer has been turned
on) and lift the phone to your ear.
3) When you have finished your conversation, press END.
If you do not answer the call, the "Missed Call Indicator"
remains on the display (indicating someone attempted to
phone you). Press MEM to view the missed calls (use # or W
to scroll the list) or press CLR to clear the display. (See page
31, Call Lists.)
1 M i s s e d
c a l l s.
P r e s s M E M
t o v i e w
The quality of your call depends on the strength of the cellular
signal in your area. The phone displays current signal strength
as a series of bars running up and down the display screen.
The more bars, the better the signal. If the signal is poor, try
moving the phone slightly to improve reception. If you are
using the phone in a building, it may be necessary to move
near a window, or outdoors for better reception.
The volume key controls the volume of the earpiece during
conversation mode and the keypad tones during standby mode.

RECEIVING A CALL

SIGNAL STRENGTH

VOLUME KEY
VOL
nnnnnnn
J a n 0 1
1 2 : 0 0 a m
SYSTEM?
-9-
, you are outside your
1 2 : 0 0 a
0 1 ]
8 1 7 1 2 3 4 5 6 7
, appear on
M o n