Setting The Backlight - NEC DT 2000 Owner's Manual

2) Enter your 4-digit lock code.
Note: For security the display will not show the 4-digit
lock code.
3) Press 8.
4) Press MEM.
Your total call time counters are now reset to zeros.
5) Press CLR (Hold) to return to standby mode.
When any key except PWR is pressed, the phone keypad and
display backlight is illuminated for ease in viewing. The
backlight remains displayed for 10 seconds after the last key
is pressed. When a key is pressed again, the phone keypad
and display backlight is again illuminated.
With the phone connected to a vehicle power adapter, the
keypad and display backlight can be set to remain illuminated
continuously.
D H B
FCN 6
Lock Code
Function
D
H B
FCN 68
Total Time
Clear
D H B
FCN 68
Total Time
CLEARED
D H
D
H
Total Time
000 h 00 m H
000 h 00 m R

SETTING THE BACKLIGHT

B
-22-
Home
Roam