Muting/Unmuting - NEC DT 2000 Owner's Manual

3) Press # or W W W W W to scroll through calls.
2:30 a
01]
2141234567
NEC ELECT
Outgoing
4) Press SND to call a displayed phone number; press FCN +
MEM + Memory Location (for example, 12) or FCN + MEM
(hold) to store a number; or press CLR to exit.
5) To clear all call lists in memory, press FCN + 6. Enter the
four (4) digit lock code. Press 1. Display shows Time Stamp
Clear. Press MEM. Display shows Cleared. Press CLR.
Display returns to standby.
The Mute function operates only when the phone is in the
conversation mode. There are two (2) Mute positions, MIC
MUTE or FULL MUTE.
MIC MUTE - This function switches off the microphone while
in the conversation mode.
FULL MUTE - In the portable configuration, this function
switches off both the microphone and the earpiece while in the
conversation mode.
MIC MUTE:
1) Press FCN + 9. This switches off the microphone.
Tue
59 m 59s
2:30 a
01]
2141234567
Missed Call

MUTING/UNMUTING

D
D H B
M i c M u t e
-32-
2:30 a
01]
2141234567
Incoming Call
Tue
03m 06s
Tue
59 m 59s