Pauses - NEC DT 2000 Owner's Manual

1) Press FCN + 4.
2) Press 3.
3) Press MEM to turn Long DTMF on or off.
4) Press CLR. The phone returns to normal standby.
Second, recall a number from a memory location and send it
as a DTMF tone. (MEM, and the memory location number).
Send the DTMF tones by pressing SND.
A series of tones, each representing a number, will be heard.
Hints for Storing a DTMF Number in the Memory
If you need to place a manual pause between DTMF digits
press FCN + 0 + 0. If you want to place a automatic pause
between DTMF digits press FCN + 0 + 1 (P = 3 Seconds). If
you want to link memory locations for a long DTMF number
press FCN + 0 + 2.
PAUSES - (Manual) [FCN + 0 + 0] This function creates pauses
while sending out DTMF signaling tones during conversation mode.
When a manual pause is encountered in the DTMF string, the phone
will pause indefinitely, until the user presses the SND key.
More than one pause may be placed in a sequence, separating
several groups of DTMF digits.
D H
D H B
FCN 4_
Tone
Function
D
H B
FCN 43
Long DTMF
off
D H B
0 : Pause
1 : Auto - P
2 : MemLink
-27-