Error Tone; Alarm Clock, Auto Power On, And Auto Off Function; Setting The Alarm - NEC DT 2000 Owner's Manual

ALARM CLOCK, AUTO POWER ON,
AND AUTO POWER OFF FUNCTION
The alarm clock function allows the user to set the time at
which the phone alarm sounds with the phone alarm being
used as an alarm clock. The phone powers on automatically if
the power is off at the alarm set time. The clock alarm
operates only once; therefore, it is necessary to reset the
phone alarm clock for the next necessary alarm time. The
clock alarm sounds for 20 seconds unless the [CLR] key is
pressed. If the phone is powered on at the alarm set time, the
alarm still sounds. If any key except [CLR] is pressed, the
alarm continues for 20 seconds and phone remains powered
on.

Setting the Alarm:

1) Press FCN + 2.
flashing
2) Press VOL. The Alarm Icon appears on the screen
and the flashing indicator moves to the hour field. (01 to 12
are valid entries for hours.)
flashing
3) Enter Alarm Time (i.e., 11). Press MEM anytime the hour or
minute fields are flashing to change to either am or pm.
flashing
D
H B
ON - - : - -
OFF - - : - -
ALM - - : - -
D H B
ON - - : - -
OFF - - : - -
ALM 12 : 00 a
D
H B
ON - - : - -
OFF - - : - -
ALM 11 : 00 a
-34-
Alarm Icon