Description Of Settings; Priority Of Settings - Grundfos CRE Installation And Operating Instructions Manual

9. Description of settings

9.1 Priority of settings

You can always set the pump to stop by pressing
the pump to stop by continuously pressing
always set the pump to operation at maximum speed or to stop with Grundfos GO Remote.
If two or more functions are enabled at the same time, the pump operates according to the function with the highest priority.
Example: If you have set the pump to maximum speed via the digital input, the pump operating panel or Grundfos GO Remote can only set
the pump to "Manual" or "Stop".
The priority of the settings appears from the table below:
Priority Start-stop button
1 "Stop"
2
3
4
5
6
7
8
9
10
11
12
13
14
1) If the bus communication is interrupted, the pump resumes its previous operating mode, for example "Stop", selected with Grundfos GO Remote or the
pump operating panel.
on the pump operating panel. When the pump is not in "Stop" mode, you can always set
. Furthermore, you can set the pump to maximum speed by continuously pressing
Grundfos GO Remote or operating panel
on pump
1)
"Stop"
"Manual"
1)
"Max. speed"
"Min. speed"
"Start"
Digital input Bus communication
"Stop"
"Stop"
"Max. speed"
"Min. speed"
"Start"
"Max. speed"
"Min. speed"
"Start"
. You can
59