Delete History; Define Home Display; Display Settings; Store Settings" ("Store Actual Settings") - Grundfos CRE Installation And Operating Instructions Manual

8.30 "Delete history"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in the advanced operating panel.
In this menu, you can delete the following historic data:
• "Delete operating log".
• "Delete energy consumption".

8.31 "Define Home display"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in the advanced operating panel.
In this menu, you can set the "Home" display to show up to four
user-defined parameters.
Factory setting
See the section on factory settings.
Related information
9.2 Factory settings

8.32 "Display settings"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in the advanced operating panel.
In this menu, you can adjust the display brightness and set whether
or not the display is to turn off if no buttons have been activated for
a period of time.
Factory setting
See the section on factory settings.
Related information
9.2 Factory settings

8.33 "Store settings" ("Store actual settings")

Pump variant
CME
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
Grundfos GO Remote
In this menu, you can store the actual settings for later use in the
same pump or in other pumps of the same type.
Advanced operating panel
In this menu, you can store the actual settings for later use in the
same pump.
54
"Delete history"
●
●
"Define Home display"
●
●
"Display settings"
●
●
"Store settings"
("Store actual settings")
●
●

8.34 "Recall settings" ("Recall stored settings")

Pump variant
CME
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
Grundfos GO Remote
In this menu, you can recall stored settings from a number of
previously stored settings that the pump then uses.
Advanced operating panel
In this menu, you can recall the last stored settings that the pump
then uses.
8.34.1 "Undo"
Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in Grundfos GO Remote.
In this display, you can undo all settings that have been made with
Grundfos GO Remote in the current communication session. Once
you have recalled settings, you cannot undo.

8.35 "Pump name"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in Grundfos GO Remote.
In this display, you can give the pump a name. In this way, you can
easily identify the pump when connecting with Grundfos
GO Remote.

8.36 "Connection code"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in Grundfos GO Remote.
You can set a connection code to avoid having to press the
connection button each time and to restrict remote access to the
product.
Setting the code in the product using Grundfos GO Remote
1. Connect Grundfos GO Remote to the product.
2. In the product dashboard, select "Settings".
3. Choose "Connection code".
4. Enter the wanted code and press [OK]. The code must be a
character string (ASCII). You can always change the code. The
old code is not needed.
Setting the code in Grundfos GO Remote
You can define a default connection code in Grundfos
GO Remote so that it automatically attempts to connect to the
selected product via this code.
"Recall settings"
("Recall stored settings")
●
●
"Undo"
●
●
"Pump name"
●
●
"Connection code"
●
●