Epson WF-5690 Series Service Manual page 86

Epson WF-5690/4640/4630/5620/5190/5110 series
Left
Application point 5
Contact surface of Carriage
Assy with CR Guide Frame
CR Sub Slider
Application point 4
Carriage Assy
CR Front Slider Right
Bottom Application point 3
APG Slider
CR Rear Slider
Application point 2
APG Cam
Apply on steps
Figure 4-10. Lubrication of the Carriage Assy
Maintenance
Application point 6
CR Front Slider Left
Right Application point 5
Contact surface of Carriage
Assy with CR Guide Frame
Application point 6
CR Front Slider Right
Application point 7
CR Rear Slider
Application point 1
Apply on projections
<Lubrication Point>
1. Contact surfaces (x2)
of the Carriage Assy
with the APG Cam
2. Contact points (x2) on
the APG Cam with the
APG slider
3. Contact points (x4) on
the APG Slider with
the CR Guide Frame
4. Contact point on the
CR Sub Slider with the
Main Frame
5. Contact surfaces (x2)
of the Carriage Assy
with the CR Guide
Frame
6. Contact points (x2) on
the CR Front Slider
Left/Right with the CR
Guide Frame
7. Contact points (x2) on
the CR Rear Slider
with the CR Guide
Frame
<Type>
G-71
<Application Amount>
1. 0.02 g
2. 0.02 g
3. 0.05 g
4. 0.02 g
5. φ 1 mm x 0.05 g
6. 0.05 g
7. 0.05 g
<Remarks>

Apply with injector.

For 1, 2, 3, 4, 6 and 7,
spread grease with
brush as shown in the
figure after application
with injector.
Lubrication Points and Instruction
Revision D
86
Confidential