Epson WF-5690 Series Service Manual page 70

Epson WF-5690/4640/4630/5620/5190/5110 series
 APG Position Check
Make sure the APG position is in the [PG1] position.

How to check
Perform the following to check if the PG position is surely set to PG 1.
1. Move the Carriage Assy to the center of the printer.
2. From the 0-digit side between the Main Frame and Carriage Assy, check the APG Cam is as shown
in "PG 1" in
If the lever is in the NG condition shown in
1. Move the Carriage Assy to the 0-digit side.
2. Rotate the PF Roller counterclockwise to move the APG Lever out of the hole of the Main Frame.
3. Move the Carriage Assy to the 80-digit side until it touches the APG Lever.
4. Return the Carriage Assy to the center of the printer.
OK
Adjustment
Figure 3-19.
Right side of Carriage Assy
OK
APG Cam
Carriage Assy
PG 1
When the APG Cam is the nearest to
the 0-digit side.
Figure 3-19. PG Position
Figure 3-19
APG Lever
Figure 3-20. APG Lever
Details of Adjustments
NG
APG Cam
PG 4
When the APG Cam is the nearest to
the 80-digit side.
, set it in the [PG1] position as follows.
NG
Revision D
70
Confidential