Epson WF-5690 Series Service Manual page 49

Epson WF-5690/4640/4630/5620/5190/5110 series
2nd Cassette Housing Assy
Rear left
ASF Encoder Board
Groove B
Paper Stopper
Lever Sensor cable
Hole C Groove B
Left
ASF Motor
ASF Encoder
cable
Hole A
Ferrite core
Route this outside rib.
ASF Motor cable
ASF Motor cable and ASF Encoder cable
ASF Motor
Connect to
connector on ASF
ASF Encoder cable
Encoder Board
 Insert the ferrite core of the ASF Motor cable into the hole A of the 2nd Cassette Housing Assy, and route the cable through the hooks and ribs as shown above.
 Insert the ferrite core of the ASF Encoder cable in the hole B of the 2nd Cassette Housing Assy, and route the cable through the hooks and ribs as shown above.
 When connecting the Paper Stopper Lever Sensor cable to the ASF Encoder Board, follow the procedure below.
1. Route it through the groove A of the 2nd Cassette Housing Assy, and then route it through the hook and ribs as shown above.
2. Pull it out from the hole C of the 2nd Cassette Housing Assy, and route it through the groove B of the 2nd Cassette Housing Assy.
Disassembly/Reassembly
*
Bottom
Paper Stopper Lever Sensor cable
Hole C
Front
ASF Motor cable
ASF Motor cable
Connect to Relay
connector
ASF Encoder cable
Ferrite core
Groove A
2nd Cassette Housing Assy
Hook
Rib
Relay connector
Hole B
Routing FFCs/Cables
Revision D
49
Confidential