Emitter/Receiver Mounting Bracket Dimensions; Control Module Specifications - Banner A-GAGE High-Resolution MINI-ARRAY MAHE6A Instruction Manual

6.3 Emitter/Receiver Mounting Bracket Dimensions

QD End
ø30.5 mm
(1.20")

6.4 Control Module Specifications

Power Requirements
16 V dc to 30 V dc at 1.0 A (typical: 0.5 A at 16 V dc)
Output Configuration
MAHCVP-1: Two PNP discrete (switched), two 0 V to 10 V voltage
sourcing
MAHCVN-1: Two NPN discrete (switched), two 0 V to 10 V voltage
sourcing
MAHCIP-1: Two PNP discrete (switched), two 4 mA to 20 mA current
sinking
MAHCIN-1: Two NPN discrete (switched), two 4 mA to 20 mA current
sinking
NON-QD End
ø6.8 mm (2)
(0.27")
ø13.2 mm
(0.52")
Slots have clearance
for M4 bolts (supplied)
34.8 mm
and allow 30 rotation
(1.37")
Min. R.
3.0 mm
(0.12")
53.8 mm
(2.12")
Figure 28. Emitter/Receiver Mounting Bracket Dimensions
www.bannerengineering.com - Tel: + 1 888 373 6767
A-GAGE
6.4 mm
(0.25")
57.2 mm
(2.25")
44.5 mm
(1.75")
6.4 mm R
11.9 mm
(0.25")
(0.47")
24.6 mm
(0.97")
Material: Cold Rolled Steel
Finish: Black, Zinc Plated
Chromate Dip
Construction
Polycarbonate housing; mounts to flat surface or directly onto 35 mm
DIN rail
Environmental Rating
Control Module: NEMA 1, IEC IP20
Emitter/Receiver: NEMA 4, 13; IEC IP65
Operating Conditions
0 °C to +50 °C (+32 °F to +122 °F)
95% at +50 °C maximum relative humidity (non-condensing)
®
High-Resolution MINI-ARRAY
3.8 mm
4.8 mm (2)
(0.15")
(0.19")
38.1 mm
(1.50")
Full R (4)
10.2 mm (2)
(0.40")
®
31