5.7.3.1
Attaching the Main Seal
Procedure:
Follow the sequence in
features of the main seal into the respective slots of the front housing.
Figure 32: Attaching the Main Seal
No.
1
2
3
5.7.3.2
Installing the OLED Display Module Assembly
Procedure:
1 Insert the OLED rubber jacket tabs into the slots on the front housing to assemble the OLED
capacitive touch proximity module assembly.
Figure 33: Installing the OLED Display Module Assembly
No.
1
2 Press down the OLED capacitive touch module and the OLED display module assemblies to
ensure that they are in place.
3 Insert the capacitive touch metal retainer and press it down firmly until it snaps in place below
the plastic retention feature of the front housing.
Figure 32: Attaching the Main Seal on page 81
2
1
1
to insert the retention
3
Description
Installation sequence
Black tape
Retention features
Description
Rubber jacket tabs
MN002952A01-AH
Chapter 5: Maintenance
81