Radio Disassembly And Reassembly; Torque Specification Chart; Disassembling The Radio; Table 25: Power Supply - Motorola ST7000 Basic Service Manual

MN002952A01-AH
Chapter 5: Maintenance

Table 25: Power Supply

Part Number Description
PS000212A01 201 W Power Supply

Table 26: Programming Cable

Part Number Description
PMKN4122_ RS-232 Programming cable (set cable switch to FLASH)
PMKN4196_ USB-C to USB-A Radio Programming Cable

Table 27: Miscellaneous

Part Number Description
HW001104A01 Battery Cover Removal Tool
PMHN4359_ Battery Cover
5.7

Radio Disassembly and Reassembly

Mechanical checks and self-tests should be performed on the unit at the basic level of service. To
perform testing at the field level, it is sometimes necessary to remove the antenna and the housing
from the unit.
NOTICE: Read each procedure thoroughly before performing the actual task.
5.7.1

Torque Specification Chart

Use the recommended torque value in this chart when fastening different parts of the radio.

Table 28: Torque Specification Chart

Description
USB-C/AJ Retainer Screw
Main Screw
5.7.2

Disassembling the Radio

Only Motorola Solutions Service Centers or Authorized Motorola Solutions Service Dealers can
disassemble the radio for repair or maintenance.
Prerequisites: Prepare a torque screwdriver with 3 IP and 6 IP TORX Plus
74
Part/Kit Quantity
FN000128A01 1
03012043002 6
®
Torque
0.7±0.1 lb-in
2.2±0.1 lb-in
bits.