MN002952A01-AH
Chapter 4: Test Setup and Testing
Figure 6: Battery eliminator removal
1
No.
1
2
6 Fully remove the battery eliminator from the compartment.
4.2
Flashing Mode
This section lists the applicable flashing mode for the radio and its procedures.
•
Blank Flash Mode
NOTICE: Blank Board Flashing Mode is not supported and can only be performed at
authorized Motorola Solutions Repair Center.
•
USB-C/Norm Mode
•
UART Mode
38
+ve
GND
Description
Battery Eliminator
Banana Plug
+ve
GND
2