Testing Charger Recognition - Motorola ST7000 Basic Service Manual

MN002952A01-AH
Chapter 4: Test Setup and Testing
37 The display shows:
Bluetooth
Test
38 Do the following:
Action
Press any key.
Wait for result.
Press any key to continue.
Press any key to continue.
Speak into the internal mi-
crophone.
Press any key to continue.
Speak into the paired
Bluetooth microphone.
39 Press the corresponding key to proceed to the next test.
Tx Power Test
40 The display shows:
TX Power Class 3L test
41 Press the corresponding key to continue.
42 The display shows:
TX Power Class 4 test
43 Press the corresponding key to continue.
The display shows:
End Test
Press any key
to turn the
radio OFF
Test is completed. Press any key to turn the radio OFF.
4.13.2

Testing Charger Recognition

Procedure:
1 Turn the radio ON.
2 Connect the Rapid Travel Charger accessory connector to the handset. Check the following:
• LCD display shows charger connected.
60
Result
The display shows:
BT test - pairing
WAIT !!!
NOTICE: Be prepared with supported Bluetooth
accessories configured to pairing mode.
The display shows pairing test result.
The display shows pairing connection test result.
The display shows:
BT microphone
test - start
You hear yourself in the paired Bluetooth audio speaker.
The display shows:
BT speaker
test - start
You hear yourself in the internal speaker.