Brewing Unit Lid; Brewer With Drive - WMF 800 Manual

Engineering
2/4.1

Brewing unit lid

WMF 800 / 900
In order to access the brewing unit, the brewing unit cover must be removed. For
weekly cleaning, the brewing unit can be pulled out from the top, and the interior of
the machine will be easier to clean.
2/4.2

Brewer with drive

1. Brewing unit motor
2. Spindle
3. Friction piston
3.1 Spring for friction piston
4. Piston below (brewing water entry into the cylinder)
5. Brewing cylinder
6. Discharge piston with cover (0.6 mm opening)
7. Insertion funnel
8. Scraper
9. Brewing water inlet
10. Aperture
11. Angle
12. Side parts, left and right
13. Pinion
12
11
6
7
10
2
9
8
5
4
3.1
3
13
1
T2-28
WMF 1000 S / 1000 pro S
The ground coffee is moved
from the ground coffee spout
of the grinder over the funnel
into the open brew chamber.
Scattered ground coffee can
reach the tub bottom and must
be regularly cleaned out.
The drive is supplied by the
brewing motor, the power
is transferred over a pinion.
Import bevels on the pinion
can set the brewer in nearly
all positions. The pinion grips
against the teeth of the brewer
spindle. On the other hand, the
brewer spindle setting can be
corrected with the multitool
before replacing.
Brewing unit cleaning
see User Manual
© WMF 800 / 900 / 1000 S / 1000 pro S Edition 07/2014 - KMT