Part 1 Technical Information; 1/1 Technical Information Wmf 800 - WMF 800 Manual

Part 1 Technical information
1/1 Technical information WMF 800 / 900
Brewing process
Pot function
Daily / hourly performance **
Average daily use
Nominal power rating *
Energy saving mode
(Consumption at operating
temperature, without water
dispensing)
Zero Energy function
Mains power connection *
Mains voltage tolerance range
Ambient temperature
Maximum humidity
Accessories
Degree of protection
Protection class
Water tank capacity
Drip tray capacity
Steam jet cup warmer
Coffee bean hopper
Continuous sound pressure level
External dimensions W/H/D
Weight empty
On-site power connection *
On-site fuses
Others
Procedure
Installation clearances
Built-in electrical connection
Water supply and drainage
© WMF 800 / 900 / 1000 S / 1000 pro S Edition 07/2014 - KMT
WMF 800
Coffee specialties with and without milk.
Maximum 35 cups coffee specialties with and without milk and/or milk foam dispensing per
day.
4 - 5 liters hot water total amount per hour.
Programmable switch-on and switch-off times for individually adaptable power needs; no
power is consumed when switched off.
1/N/PE~ 50/60 Hz; 220 - 2 40 V; fused with a maximum of 16 A.
230 V + +6 % -10 %; mains voltage interruption <50 ms no interruption of function
+5 °C to max. +35 °C (empty the water line in case of frost)
80 % relative humidity without condensation, no water spray,
Do not use unit outdoors.
Multitool, cleaning brush, cleaning tablets, milk nozzle, 1.7 mm (transparent), WMF Gasket
grease (5 g), milk system cleaner, filter cartridge with adapter.
Coffee machine with dry coffee grounds ejection into the integrated grounds container
Drip tray without drainage.
For operating, service, and safety reasons, the machine should be installed with a clearance of
not less than 50 mm at the back and sides from the building or non-WMF components. A clear
height of 1100 mm from the top of the supporting surface should be ensured. Recommended
height of the working surface is a minimum of 700 mm and maximum of 900 mm from floor
level. A minimum of 320 mm should be planned for remove the brewer.
The power cord must not come into contact with hot surfaces.
No additional user is allowed to be connected to the power connection.
In each case, WMF-specific connection conditions should be observed for water and Power
supply. For drinking water with a carbonate hardness above 5 °dH (carbon hardness),
a WMF scale filter should be installed.
Technical information / basics
Use the pot function to dispense several cups
of café crème at once.
7 cups
1.7 - 2 .3 kW
Four Eco-Modes can be selected:
Eco mode 1
w
Eco-Mode 2
Eco-Mode 3
Eco-Mode 4
IPX0
Protection class I
2.2 litres
about 1.0 liters
At the touch of a button, hot steam slowly
flows into the cup from below.
250 g (0.75 liters)
<70 dB
305 mm / 400 mm / 443 mm
approx. 15 kg
3 x 1.5²/via isolated ground outlet
at least 10 A
WMF 900
5 1 W
4 2 W (savings of 18 %)
w
3 9 W (savings of 24 %)
w
2 2 W (savings of 57 %)
w
T1-3