WMF 800 Manual page 118

9 Button Programming > Programming
12. Re-pressing time – indicates how long after brewing the brewing chamber releases be-
fore it is opened again, value must not be modified.
13. Pause between milk and coffee – indicates how long the waiting phase is between milk
and coffee dispensing, this setting serves to get a better Latte Macchiato separation, value
should only be modified at the coffee machine.
14. Milk dosage – indicates how long milk is dispensed (only for coffee machines with air
pump), value should only be modified at the coffee machine.
15. Milk foam dosage – indicates how long milk foam is dispensed, value should only be
modified at the coffee machine.
16. Milk foam before coffee – the preparation order of coffee and milk can be modified
here; value should only be modified at the coffee machine.
17. Product released – activates or deactivates the beverage button, value must not be mod-
ified.
18. Start / Stop operation – activates or deactivates the function whether or note the bev-
erage dispensing can be interrupted by pushing the beverage button again, function must
not be modified.
19. Release for double click 2x – activates or deactivates the 2
pensing after a short double click of the beverage button) and thus the dispensing of
double beverages (only WMF 1000S/proS). Function is only available, if „Dispense product
as double product" is deactivated, value must not be modified.
20. 2x product in double cycle – indicates whether dispensing of double products is done in
one or two brewing cycles, value must not be modified.
21. Dispense product as double product – activates or deactivates the double beverage dis-
pensing in case of single click, function only available if "Release for double click 2x" is
deactivated, value must not be modified.
55
button level (beverage dis-
nd