Sample Viewing Port - Datacolor 650 User Manual

Sample Viewing Port

When measuring small samples, you may need to check that the sample is properly
positioned at the port. To verify that the correct area of the sample is being measured:
1. Place the sample at the port. Grasp the black tab above the aperture plate.
2. Pull top of door down to its full horizontal position.
3. The backside of this door reveals the area of the sample covering the port
34 • Sample Presentation and Measurement Overview
opening. If necessary, adjust the placement of the sample to target the portion of
the sample to be measured.
Datacolor 650/600/400 User's Guide