Cable Installation; Overview; Power Cable - Datacolor 650 User Manual

Cable Installation

Overview

You must install a power cable, and either a USB cable or a serial cable to connect the
instrument to a computer.
NOTE
Do not connect both cables to the unit. You have a choice of using either a serial cable
or a USB cable, and both are provided with the instrument.
The connections for the cables are found on the back of the instrument.
WARNING
Read the "Electrical and Environmental Requirements" section BEFORE connecting your
instrument.

Power Cable

A six-foot power cable is provided with the instrument.
NOTE
The power cord supplied with the unit must be used.
Power is supplied to the back of the unit via a 3-prong male connector.
Plug the female end of the power cord into the power receptacle on the rear panel of the
instrument. Insert the plug into a standard AC outlet.
Datacolor 650/600/400 User's Guide
Power cable
Overview • 7