8. Click Port Settings. The dialog box below displays:
9. Click the Advanced button. The Advanced Settings for COM3 dialog box
10. Click on the port assignment to be used for the USB port.
11. When you have completed the changes, click OK.
Changing the COM Port Assignment in Datacolor Programs
To enable the USB port for color measurements, you may need to change the COM port
assignment in the applications program. Refer to the program documentation for the
specific Datacolor applications program you are running for instructions on configuring the
instrument.
Datacolor 650/600/400 User's Guide
displays.
The field labeled COM Port Number displays the current assignment for the USB
port. To change the port setting, click the drop-down list arrow. The list of COM
ports is displayed.
USB Cable Installation • 15