Datacolor 400; Powering Up - Datacolor 650 User Manual

OPTION
UV Inc.
UV Exc.
Ready
Spec Exc.
Spec Inc.
USAV
SAV
MAV
LAV

Datacolor 400

Below is the status panel for a 400:
OPTION
Spec Inc.
Ready
Spec Exc

Powering Up

NOTE
The power cord supplied with the unit must be used.
Use this simple procedure to start using your instrument:
1. Verify all cable connections. The AC power cord should be plugged into an
2. Turn on the computer.
18 • Powering Up
DESCRIPTION
No UV filter is selected. All UV wavelengths from the light source are
included.
The UV Excluded filter is selected. No UV wavelengths from the light source
are included.
Instrument is ready for use.
The specular port is open and all measurements exclude the specular
reflection from the sample.
The specular port is closed, and all measurements include the specular
reflection from the sample.
Ultra Small Area View lens position is selected.
Small Area View lens position is selected.
Medium Area View lens position is selected.
Large Area View lens position is selected.
DESCRIPTION
The specular port is closed, and all measurements include the specular
reflection from the sample.
Instrument is ready for use.
The specular port is open and all measurements exclude the specular
reflection from the sample.
outlet. The communications cable (serial or USB) should be attached to the
instrument and host computer.
Datacolor 650/600/400 User's Guide