Advertisement
Available languages
Available languages
Tempoplex Shower Drain
The Tempoplex drain is suitable for installation in flat and superflat shower trays with a 90 mm
drain hole. Only the usual kinds of household waste water up to 95ºC my be fed in. Feeding in other
liquids is not allowed. No harmfull substances are to be fed in, such as cleaning agents which damage
sanitary equipment, draining elements and pipe materials, and particulary those with a pH value ≤ 4.
Specialist firms should carry out installation with consideration given to the provisions. The shower
drain conforms to EN 274.
Special case
1 - If the floor of the shower tray is thicker than 10 mm, separate the seal. 2 - Cut above the lower
sealing bead. 3 - Place the lower part on the drain housing and the upper part in the drain hole.
ENG
Components
1 - Sieve
2 - Inmersion tube
3 - Clamping collar with screw
4 - Seal
5 - Water trap
Advertisement
