General Specifications - Brymen BM2807CSE Series User Manual

GENERAL SPECIFICATIONS

Display: 3-5/6 digits 6,000 counts
Update Rate: 5 per second nominal
Operating Temperature: -10°C to 50°C
Relative Humidity: Maximum relative humidity 80% for temperature up to 31°C
decreasing linearly to 50% relative humidity at 50°C
Altitude: Operating below 2000m
Storage Temperature: -20°C ~ 60°C, < 80% R.H. (with battery removed)
Temperature Coefficient: Nominal 0.15 x (specified accuracy)/ °C @ (-10°C ~ 18°C
or 28°C ~ 50°C), or otherwise specified
Sensing: True RMS sensing
Pollution Degree: 2
Safety: Certified per IEC/UL/EN61010-1 Ed. 3.1, IEC/UL/EN61010-2-033 Ed. 2.0,
IEC/UL/EN61010-031 Ed. 2.0 and the corresponding CAN/CSA-C22.2 regulations to
Measurement Categories: CAT III 1000V and CAT IV 600V
Transient Protection: 8.0kV (1.2/50s surge)
E.M.C.: Meets EN61326-1:2013
mV, Diode, Ohm, & Temperature; in an RF field of 1V/m:
Total Accuracy = Specified Accuracy + 100 digits
Other functions; in an RF field of 3V/m:
Total Accuracy = Specified Accuracy + 100 digits
Overload Protection:
A & mA: 0.63A/1000V DC/AC rms, IR 10kA, F fuse; or better
A: 11A/1000V DC/AC rms, IR 20kA, F fuse; or better
V: 1100V DC/AC rms
mV, Ohm, & others: 1000V DC/AC rms
Low Battery: Below approx. 2.5V
Power Supply: 1.5V AAA Size battery X 2
Power Consumption (typical): 3.2mA
iAPO Consumption (typical): 10A
iAPO Timing: Idle for approx. 32 minutes
Accessories: Test lead set, User's manual, Banana-plug type-K thermocouple (Model
2807 only)
Optional purchase accessories: BKB32 banana-plug to type-K socket plug adaptor
(Model 2807 only)
Special Features: VFD-ACV & VFD-Hz; Hi/Lo EF-Detection (NCV & Single pole);
Display Hold w/Hold-alert
indication; BeepLit
warning; MAX Hold; BeepLit
TM
Continuity; Relative-Zero mode; Backlighted LCD display;
TM
Diode w/BeepPass
TM
17
TM