Abilica Premium TopRower 2.0 Manual page 47

Fluid resistance
This type is usually filled with water. Water-filled containers will be susceptible to the fact that algae will
appear. To prevent this, you can change the water regularly and clean out the reservoir when doing this. It is
also advisable to put some water treatment tablets in it so that you do not have to clean it so often. Such
tablets can be purchased at many different retailers.
Air + magnetic resistance
This is a combination of air and magnetic resistance. Just look at the two points of the specific maintenance
points for these types of rowers.
Hydraulic resistance
Hydraulic resistors have hydraulic pistons/dampers that provide resistance when using it. There are more
turning points on a hydraulic rower than most other types. This means more chances to develop a sound. If
you regularly lubricate these moving joints, the chances of this happening are reduced.
The actual part of the hydraulic rower that creates resistance, the piston, can leak sometimes. There is no
maintenance to be done on the piston. If it leaks, replace it. You will probably feel that the resistance is
lower when this happens. It is a good idea to check regularly for signs of leakage. Temperature can also
affect the resistance as the oil inside the piston is affected by this.
IMPORTANT REGARDING SERVICE
If there are problems of any kind, we ask you to contact Mylna Service. Our experienced consultants can
help you with questions about our products, assembly, spare parts and issues regarding faults or other
problems.
We urge you to contact us before returning the product to the retailer so that we can offer you the best help
possible.
Visit our website www.mylnasport.com – here you will find useful information and user manuals. On our
website you will find our contact form, by filling out the form you will supply us with the information we
need to help you as effective as we can.
ORDER OF SPARE PARTS
Write to e-mail: service@mylnasport.no
When ordering spare parts, please have the following information ready.
•Model number of the product
•Name of the product
•Serial number of the product
•The spare part's number (please see the parts drawing and parts list)
46