Table of Contents
Advertisement
E-OU and B-OU versions
If the card is faulty and needs to be replaced, make all the electrical connections as on the original card.
Make sure to also set the DIP SWITCHES on the new PAC-IF interface card as illustrated below.
The DIP SWITCHES of the SW1, SW2, SW3, SW6 must be set in the same way for all the PAC-IF interface cards in the switchboard
of the WIZARDX unit.
CAUTION:
When the WIZARDX is combined with a single Mr. Slim
unit, dip-switch 8 of SW1 must be in the OFF position.
IUM_WIZARDX_03_22_EN
73
Advertisement
Table of Contents
