Table of Contents
Advertisement
IUM_WIZARDX_03_22_EN
Fans
The delivery and return fans are centrifugal reverse-blade plug-fans with a free impeller and an electronically controlled high
performance motor commonly called an EC motor. The motor is directly integrated into the fan structure for greater structural
compactness and the ZAmid high performance composite material of the impeller and the low consumption of the electronically
controlled motor allow for the best in ventilation performance.
Air filter
In its standard configuration, the machine is supplied with ISO COARSE 55% - ISO 16890 (G4 - EN 779:2012) synthetic filters +
EPM1 50% - ISO 16890 (F7 - EN 779:2012) rigid bag filters on the delivery line, and ISO COARSE 55% - ISO 16890 (G4 - EN
779:2012) synthetic filters on the return line.
Cover panel
The cover is made as our standard in aluminum sheet and is always supplied as standard equipment for the WIZARDX-G07 units
(outdoor installation). Other materials can also be used (galvanised steel - AISI 304). When the cover panel is fitted, the size of the
unit is increased by 20 mm on each side and the height of the module it is fitted on is increased by 35 mm.
In some cases, the cover panel can be supplied disassembled on pallets or inside the unit and then fixed to the module using the
screws supplied. If the self-drilling screws that secure the roof are removed, they must be replaced with metric screws and their insert
attached to the frame.
19
Advertisement
Table of Contents
