Table of Contents
Advertisement
IUM_WIZARDX_03_22_EN
Refer to the documentation provided with the Mr. Slim units for further information.
Affix the adhesive label provided with the documentation in the WIZARDX unit on the individual Mr. Slim units (in the main
section together with the technical documentation).
Avoid sticking the adhesive label on parts of the machine that can be accidentally put in a different place (the removable panels,
for example).
Connect the communication cable between the individual Mr. Slim units and the corresponding PAC-IF interface card as
indicated in this manual.
The WIZARDX unit and the Mr. Slim units must be connected by means of the cooling circuits (refer to this manual and the
manual of the Mr. Slim units).
A vacuum must be created in the cooling circuit according to the regulations in force and the instructions in the manual of the
Mr. Slim units. Once the vacuum is created, open the valves on the Mr. Slim units.
The WIZARDX unit must be connected with suitable ducts to the room where the air is to be taken out or sent.
Electrically connect the Mr. Slim units and the WIZARDX unit independently with reference to their manuals.
56
Advertisement
Table of Contents
