Table of Contents
Advertisement
Technical data plate
The technical data plate (see the example in the chapter 1.2 "Nomenclature") provides the main information needed for electrical
connection of the unit and for proper maintenance. The supply voltage must not exceed +10/-10 %. The power absorbed at full
capacity FLI represents the maximum value that can be reached for the specified operating voltage. The power supply line must be
sized according to the current absorbed by the unit at full capacity, or FLA. The customer must have an adequate power supply
system. It is therefore important to check that the power supply voltage indicated on the rating plate of the unit is compatible with
that of the customer's electrical system.
The data plate also indicates the year of manufacture, model and serial number, the maximum permissible pressures in the hydraulic
circuit, the code of the wiring diagram and the operating weight of the unit.
INFORMATION:
The data on the name plates of WIZARDX units only refer to such units. For information regarding Mr.
Slim condensing units, refer to the relative documentation.
Identification of the sections
The unit may have been delivered in several sections.
The various sections making up the unit each have a serial number label (see example below) bearing the serial number of the main
unit.
All parts with the same serial number must be assembled to form a single unit.
Demountable unit (optional)
For transport or handling in cramped environments and with narrow passages, the units can be supplied as "demountable". In this
case, the individual sections can be disassembled to minimize the size or weight of the individual parts.
Depending on its size, the machine will be shipped assembled or divided into its standard sections.
During reassembly, the installer must take all the necessary measures to ensure that the machine can work properly (no air leakage,
no water seepage, etc.)
.
IUM_WIZARDX_03_22_EN
27
Advertisement
Table of Contents
