Control Panel - Fronius TransPocket 180 RC HW Operating Instructions Manual

Control Panel

(1)
(2)
(3)
(4)
(5)
(6)
(6)
(5)
Set value display
displays the currently selected amperage
- The symbol is always lit; the other indicators have no func-
tion
Setup button 1
For accessing the Setup menu
Display
Setup button 2
For accessing the Setup menu
Selection dial
To change the amperage | To navigate through the Setup menu
Status indicators
Used to indicate the different operating statuses of the power
source:
VRD - No function
Setup - Lights up when in Setup mode
Temperature - Lights up when the device is outside of the per-
mitted temperature range
Error - Lights up when there is an error, also see
tion section on page
TAC - No function
32
(1)
(2)
(3)
(4)
Fault Correc-
23