Speed Display - Vmax Screen; Speed Display - Average Speed Screen; Speed Display Settings - Racelogic Performance Box Touch V1 Quick Start Manual

Speed display mode

Hide thumbs Also See for Performance Box Touch V1:

Table of Contents

Speed Display - VMAX Screen

This screen displays the Absolute Top Speed reached until the

Reset Button

is pressed at the bottom of the screen.

If a Target Speed is selected within the Speed Settings, it will be displayed in grey underneath the VMAX.

Formatted in two halves, the Average Speed screen displays both the Average Speed (since last boot up or power

cycle) and Distance Travelled (since last boot up or power cycle) on the same screen any time that movement is

detected. The average speed is displayed using either continuous or moving calculations.

The screen can be reset at any time by pressing the

Reset Button

at the bottom of the screen.

If you have selected a Target Speed in the Speed Settings, it will be displayed in grey underneath the Average Speed.

You can access the Speed Display settings screen by selecting the

Settings Button

on the bottom left of the screen.

Here you can chose between speed display options.

Table of Contents

Do you have a question about the Performance Box Touch V1 and is the answer not in the manual?