Preset (Menu => Function => Preset Short Cut : Prst ) - Honeywell ScanDome III HSDC-252 Series Operation & Programming Manual

7. Pushing the Joystick down and twist the Joystick to CCW/CW (or push the stick to
right/left) to set waiting time.
8. Locate the cursor on OPERATION option by pushing the Joystick down. Choose
operation status Enable or Disable by pushing the Joystick to the right or to the left (or
twist CCW/CW).
3.1.2 PRESET (MENU => FUNCTION => PRESET Short Cut : PRST )
Preset memorizes pan, tilt, zoom, focus and iris settings. Once programmed, pressing
combination of 0 ~9 numbers and a Preset button on your controller automatically calls up the
preset position. Presets may be assigned to alarm actions or as the "home" position for the
dome camera.
Locate the cursor on the PRESET item and then push the joystick to the right to enter PRESET
menu.
There are 31 pages of preset programming menu. Each page can hold 8 presets. Locate the
cursor on "PREV
the Left or Right on the "PREV
Function
Home Function
Preset
Pattern
Scan
Tour
Exit
NEXT", preset menu pages can be scrolled by pushing the Joystick to
NEXT".
Preset
No. F I B M Title
001 A A F F xxxxxxxxxxxxxxxx
002 M M O F ----------------
003 - - - - ----------------
004 - - - - ----------------
005 - - - - ----------------
006 - - - - ----------------
007 - - - - ----------------
008 - - - - ----------------
Prev Next
Save And Exit
F : FOCUS I : IRIS B : BLC M : MOTION
X : 16 digit of preset title
- : not defined
█ : Current cursor position
F : A(Auto Tracking)/M(Manual Tracking)
I : A(Auto Iris)/M(Manual Iris)
B : F(BLC OFF)/O(BLC ON)/A(Auto BLC)/B(BMB)/W(WDR)
01/31
18