Chapter 1 - Introduction; Features - Honeywell ScanDome III HSDC-252 Series Operation & Programming Manual

Chapter 1 — Introduction

1.1 Features

TM
The ScanDome III
enhanced lowlight sensitivity. User friendly, on-screen pull-down menus and short-cuts make it
easy to setup and program functions.
System information aides trouble shooting by displaying the hardware and software version of
the dome driver, baud rate, and protocol.
• Built-in 25x or 36x times optical power zoom camera.
True Night Shot function with Super HAD and IR cut filter removal mechanism
• 248 Presets programmed with view direction, Zoom, Focus, IRIS, BLC, Motion
• 4 Patterns record and play back user preference of surveillance path up to 240 sec.
• 16 Scans : 8 speed steps from slow to medium panning with smooth DiagonalScan.
• 8 Tours : Each tour consists up to 64 Preset, Pattern, Scan and other Tours.
Tour can be expanded up to more than 500 different functions using nested Tours.
Smooth DiagonalScan mode and programmable Individual dwell time camera functions.
(Speed, Dwell time, BLC, BMB, Motion, Focus, IRIS of the preset)
• 8 Alarm inputs with 0~8 priority / 2 Auxiliary outputs programmable NC & NO.
• 8 Privacy Zones : Video off or up to 8 masked blocks and 8 mask color selectable
• 64 steps of variable speed from 0.1°/sec to 120°/sec.
Max manual speed 480°/sec with Turbo key pressed, Preset speed is 420°/sec.
Minimum adjustable angle is 0.009375° with SingleStep move function.
• Programmable user preferences of speed (Slow, Medium, Fast).
• Addressable up to 999 camera IDs (Extendable up to 3999 in factory mode).
• Built-in RS-485/422 receiver driver.
• On-site software upgrade and upload/download of programmed data into the KBD/Dome.
• Built-in power-line surge protection and lightning protection.
• Capable of fail-safe Hot Swap.
• Optional Tinted Bubble, Indoor & Outdoor pendant housing with heater & blower, Indoor Flush
Mount, Parapet mount & Roof Top mount.
dome camera features a high resolution Super HAD CCD imager for
7