Scan (Menu => Function => Scan Or Shortcut: Scan) - Honeywell ScanDome III HSDC-252 Series Operation & Programming Manual

3.1.4 SCAN (MENU => FUNCTION => SCAN or Shortcut: SCAN)
The Scan function supports up to 16 programmed section of angles at 8 programmable speeds.
SPEED(MODE) :
Follow the steps below to program Scans.
1. Press the SCAN key to enter Auto Scan menu directly. (or MENU => FUNCTION =>
SCAN).
2. Select an Auto Scan number by pushing the Joystick left or right.
3. Twist the Joystick to enter the title by scrolling through the alphanumeric characters
and pushing the handle to the right or left to move to the next space. Press ENTR key or
push the Joystick down to finish title mode.
4. Push the Joystick downward to select "SPEED" and set the speed by twisting the
Joystick clockwise or counterclockwise or moving the Joystick left/ right to select
the auto scan speed.
5. When finish entering the title, select "START" with the Joystick. Hold down the
SHFT/PGM key while selecting the start position using the Joystick. Current panning
position will be displayed. Release SHFT/PGM key to complete the selection of the start
position. (Or twist zoom handle or hit zoom button to start PTZ control for view selection
and hit the Focus button to stop.)
6. Push the Joystick downward to select "END." Hold down the SHFT/PGM key while
moving the Joystick to select the end position. The end position angle should be larger
than start position. Release the SHFT/PGM key to complete the selection of the end
position.
(Or twist zoom handle or hit zoom button to start PTZ control for view selection
and hit the Focus button to stop.)
7. Push the Joystick downward to select "DIR." Set the scan direction by moving the
Joystick left and right to select the auto scan direction.(CW or CCW)
Scan Menu
SCAN 01
Speed
Start
End
DIR.
SWAP
Save And Exit
1/ 2 / 3/ 4/ 5/ 6/ 7/ 8/ SLOW / MEDIUM
1: SLOWER ↔ 8 FASTER
SLW : smooth DiagonalScan in slowest speed
MID : smooth DiagonalScan in medium speed
DiagonalScan shows moving path from start point to end point including
tilt and zoom simultaneously.
01/16
: AUTOSCAN01
: 1~8/SLW/MID
: 127.1, 027.0
: 157.7, 080.7
: CCW
: OFF
21