Connect The Power Cord - Muratec MFX-1450 Installation Manual

3
4

Connect the power cord

1
2
NOTE : The appearance of the plug and outlet differs according to the countries.
0 Installation Manual
Installation_Manual.indd 10
Plug the LAN cable into the LAN connector.
Plug the other end of the LAN cable into a 10Base-T/100Base-Tx Ethernet
hub, or into the appropriate RJ-45 wall jack.
Ethernet hub
Plug the non-pronged end of the supplied AC power cord into the AC
socket on the machine.
PH ON
E1
PH ON
E2
LIN E
Plug the pronged end into a properly grounded AC outlet.
PH ON
E1
PH ON
E2
LIN E
2007/04/27 12:11:38