Step 7 : Turn The Power On - Muratec MFX-1450 Installation Manual

Step 7 : Turn the power on

1
2
3
NOTE: The calendar format may vary according to the countries.
4
Installation_Manual.indd 11
Turn the power on.
The markings are international standards: [ | ] means on, [ ] means off.
If you are installing MFX-2050 or MFX-1450, perform Step 8 "Turn off the
transport mode" first (see next page). Once the transport mode has been
turned off, you may procedure to the next procedure.
In some cases the following message will appear. If this message appears,
please enter the current date and time, then press [Enter].
U.S.
The "Server Initializing" message will appear on the display.
Please wait a few minutes until it disappears.
European and Asian countries
Installation Manual 
2007/04/27 12:11:39