Muratec MFX-1450 Installation Manual page 20

6
7
8
9
10
11
12
 Installation Manual
Installation_Manual.indd 18
Press [IP Address].
Enter the appropriate IP address using the numeric keys.
Press the arrow keys to navigate the field. Press [Clear] to delete a number.
Press [Enter]. The display returns to the TCP/IP settings menu.
Press [Subnet Mask] and enter the appropriate IP address, then press
[Enter]. Refer to the above steps on how to enter the IP address.
If necessary, enter the gateway address.
When you are finished, reboot the machine to activate the new settings.
(Turn the machine off and after three or more seconds, turn it on.)
Go to "Verifying the IP settings" on next page.
2007/04/27 12:11:41