Muratec MFX-1450 Installation Manual page 10

4
5
6
7
8
9
 Installation Manual
Installation_Manual.indd 8
Load the paper into the cassette.
• Make sure you properly stack the paper prior to setting it in the cassette.
The leading edge and sides should be even.
• Do not stack the paper over the limit mark inside the cassette.
Pinch the side paper guide and adjust it to the width of the paper.
Close the paper cassette.
Attach the appropriate paper size sticker to the front of the cassette.
If the optional second cassette has been installed, please follow these
steps.
You need to set the paper size. See "Set the paper size" on page 15.
2007/04/27 12:11:36