Muratec MFX-1430 Quick Demo Manual

e. You can now search through the network folders.
Note: You may be required to enter a Username and Password
to access the folder
f. Select the file you want to attach.
g. Select [Enter], [Enter].
>
17. Group Registration
(Contact must be registered in the address book prior to group
registration)
a. Select [Setting], [Group], [Add].
b. Enter the group name, select [Enter].
c. Select [Group Members], [Enter].
d. Select the contacts you want to add to this group.
e. Select [Enter].
>
18. Set Number of Rings and
Dialing Pause
a. Select [Setting], [Fax Settings], [Other Settings], [Next].
b. Select [Number of Rings], enter your desired number and select
[Enter].
c. Select [Dialing Pause], enter the pause time and select [Enter].
>
19. Use the [Index] to Locate a Contact
a. Select [Index] from either the Fax default screen or the E-mail
default screen.
b. You can now search for contacts by group name, numerically or
alphabetically.
>
20.
Select the Default Copy and
Fax Cassettes
a. Select [Setting], [Paper Setting], [Select Print Cassette].
b. Select the cassette you want to edit.
c. Select whether to use the cassette for fax reception, copying,
both or none.
>
21. Check the Print and Scan Counters
a. Select [Setting], [Counter].
b. Select [Print Total] or [Scan Total].
c. The number of pages used for each function will be displayed.
>
22. Card Copy Mode
a. Open the platen cover and set the card or check-sized object
on the glass.
b. Select [Card Copy].
c. Select [Card], [Enter]. The machine will scan the first side and
then prompt you to scan the next document.
d. Flip the card over and select [Yes].
e. The machine will scan the second side and then print the
document.
>
Additional features/notes
Muratec America, Inc.
3301 East Plano Parkway, Suite 100, Plano, Texas 75074
(469) 429-3300 • www.muratec.com
MK3140
>
MFX-1430/
MFX-2030
Quick Demo Guide
This Quick Demo Guide demonstrates popular
functions of the MFX-1430/MFX-2030. The '*'
symbol denotes features specific to the MFX-
1430D and MFX-2030. Press [Reset] to return to
a default screen once you have finished
programming a function or to simply start over.
Select [Start] to initiate the job in all cases.
Visit and log-in to the Muratec Web Center
at www.muratec.com/webcenter for
additional information.