Router Configuration
All changes to your RASFinder configuration are initiated through the Router Setup menu. The
Router Setup menu consists of 13 buttons that enable you to display and change the protocol
stacks, define the output of the RASFinder, perform network management functions, test the
communications link, print messages received from the target RASFinder, and download setup
information to the RASFinder.
The two outer buttons in the bottom row are used to open the on-line Help system (RASFinder Setup
Help) and end (Exit) a Router Setup session. The middle (Retry) button remains inactive until you fail
to connect to the target RASFinder.
RF300E/RF310E
Chapter 4 - RASFinder Software
37