Multitech RASFinder RF300E User Manual page 52

RASFinder RF300E/RF310E User Guide
Now, you can click on WAN 2 and enter the same information for the Port and Remote Address
groups. This will bond the two B-channels of BRI 1 together.
To set up the remote office LAN, go through the same process except point the WAN ports toward
the Corporate LAN. The remote WAN ports could be set up with an IP address of 192.168.4.20.
Now to establish your ISDN connection with your local PSTN (either the North American version or
the European version), you may have to enter some ISDN parameters, e.g., switch type used by the
PSTN, SPIDs and Directory Numbers for North America or ISDNs and sub addresses for European
and the Rest of the World (ROW). During the provisioning of the ISDN connection with your local
PSTN, the local telephone company established some ISDN parameters for your local connection. A
space is provided in Before You Start Loading your Software to document these parameters. Now, in
order to load this informtion into your RASFinder, you need to bring up the Main Menu and click on
the WAN button.
From the WAN Port Setup dialog box, click on the Advanced tab to bring up the WAN Port Setup
dialog box with the ISDN TA Control group highlighting WAN 1. To establish your ISDN parameters,
click on the Edit button and the ISDN Parameter Configuration dialog box is displayed.
52 RF300E/RF310E