Multitech RASFinder RF300E User Manual page 34

RASFinder RF300E/RF310E User Guide
6. On the WAN 1 tab, change the Port Address and Remote Address groups to be on separate
networks from the Ethernet LAN port.
If you enabled MLPPP option on the PPP Port Setup dialog box, the IP addresses for all three WAN
ports have to be identical and the remote WAN port addresses have to be within the same network
and identical.
If you did not enable MLPPP option, the WAN port addresses have to be on a different network from
the LAN port address and have to be different from each other.
7. Click on each of the WAN tabs and change the Port Address group and Remote Address group to
conform with the settings for WAN 1.
8. Click OK to return to the Main menu.
9. From the Main menu, click Download Setup button to write your new configuration to the
RASFinder. After your configuration is written to the RASFinder, you are returned to the Main menu.
Your RASFinder is now configured for LAN-to-LAN routing.
34 RF300E/RF310E